ABS (Acrylonitrile Butadiene Styrene) on eSun (Clear Plastic Spool) Spool Tare & Length Calculator
Weigh your eSun (Clear Plastic Spool) spool on a kitchen scale to instantly see remaining meters, feet, and percentage left for ABS (Acrylonitrile Butadiene Styrene) (1.04 g/cm³).
An empty eSun (Clear Plastic Spool) spool weighs exactly 245g (Plastic). A full 1kg net spool of 1.75mm ABS (Acrylonitrile Butadiene Styrene) (density 1.04 g/cm³) contains 399.8 meters (1311.7 feet) of filament.
Input Parameters & Presets
Pre-loads exact volumetric density required to calculate length.
Pre-loads empty spool deduction (Plastic).
Weigh your half-used spool directly on any digital kitchen scale.
100% of 1000g reference spool
Excludes 245g empty tare
8 hrs on Bambu Lab P1S
1.75mm diameter profile
Order Fresh 1kg Spool of ABS (Acrylonitrile Butadiene Styrene)
High-speed, tangle-free ABS (Acrylonitrile Butadiene Styrene) filament with ±0.02mm tolerance for reliable prints.
Kitchen Scale Quick-Lookup: ABS (Acrylonitrile Butadiene Styrene) on eSun (Clear Plastic Spool)
Read your digital kitchen scale directly. Tare deduction of 245g (Plastic) is already calculated below:
| Spool Status | Total Scale Reading | Net Filament | Remaining Meters | Remaining Feet | Percent Left |
|---|---|---|---|---|---|
| Low Spool | 395g | 150g | 60m | 196.9 ft | 15% |
| Quarter Spool | 495g | 250g | 99.9m | 327.8 ft | 25% |
| Half Spool | 745g | 500g | 199.9m | 655.8 ft | 50% |
| Three-Quarter Spool | 995g | 750g | 299.8m | 983.6 ft | 75% |
| Full 1kg Spool | 1245g | 1000g | 399.8m | 1311.7 ft | 100% |
eSun (Clear Plastic Spool) Spool Tare Weight vs Competitors
Compare empty spool tare weights and resulting filament meter yields for ABS (Acrylonitrile Butadiene Styrene) (1.75mm).
| Material / Specification | Empty Tare | Material | 1kg Yield | Flange Dia |
|---|---|---|---|---|
| eSun (Clear Plastic Spool)ACTIVE | 245g | Plastic | 399.8m | Ø 200mm |
| Bambu Lab (Reusable Spool) | 250g | Plastic | 399.8m | Ø 200mm |
| eSun (Eco Cardboard Spool) | 135g | Cardboard | 399.8m | Ø 200mm |
| Polymaker (Panchroma Cardboard) | 140g | Cardboard | 399.8m | Ø 200mm |
| Prusament (Honeycomb Plastic + Core) | 200g | Plastic | 399.8m | Ø 200mm |
| Hatchbox 3D (Black Plastic) | 230g | Plastic | 399.8m | Ø 200mm |
Step-by-Step Math: How We Calculate ABS (Acrylonitrile Butadiene Styrene) Length
Exact formulas and linear density substitutions for ABS (Acrylonitrile Butadiene Styrene) (1.04 g/cm³) on a eSun (Clear Plastic Spool) spool.
Deducting the verified 245g empty tare weight of the eSun (Clear Plastic Spool) (Plastic) spool leaves the exact net plastic mass.
Volumetric cross-sectional area in square centimeters for 1.75mm filament.
Dividing net mass by the linear density of ABS (Acrylonitrile Butadiene Styrene) (1.04 g/cm³) yields the printable length.
Engineering Specifications & Troubleshooting Guide: ABS (Acrylonitrile Butadiene Styrene) & eSun (Clear Plastic Spool) Hardware
Factory-tested parameters, common failure modes, and workbench best practices.
- Enclosed heated chamber required to eliminate corner warping.
- Acetone vapor smoothable.
- The empty eSun (Clear Plastic Spool) spool weighs 245g (Plastic). Flange outer diameter is 200mm with a 53mm hub bore.
Drafts from air conditioning causing layer delamination splits.
Frequently Asked Questions: ABS (Acrylonitrile Butadiene Styrene) on eSun (Clear Plastic Spool)
Spool tare weight, density, moisture absorption, and kitchen scale tips.
Q1How much does an empty eSun (Clear Plastic Spool) spool weigh?
Q2How many meters of filament are in a 1kg spool of ABS (Acrylonitrile Butadiene Styrene)?
Q3Is the eSun (Clear Plastic Spool) spool compatible with the Bambu AMS?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: