ASA (Acrylonitrile Styrene Acrylate) on Inland / Micro Center (Black Plastic) Spool Tare & Length Calculator
Weigh your Inland / Micro Center (Black Plastic) spool on a kitchen scale to instantly see remaining meters, feet, and percentage left for ASA (Acrylonitrile Styrene Acrylate) (1.07 g/cm³).
An empty Inland / Micro Center (Black Plastic) spool weighs exactly 248g (Plastic). A full 1kg net spool of 1.75mm ASA (Acrylonitrile Styrene Acrylate) (density 1.07 g/cm³) contains 388.6 meters (1274.9 feet) of filament.
Input Parameters & Presets
Pre-loads exact volumetric density required to calculate length.
Pre-loads empty spool deduction (Plastic).
Weigh your half-used spool directly on any digital kitchen scale.
100% of 1000g reference spool
Excludes 248g empty tare
8 hrs on Bambu Lab P1S
1.75mm diameter profile
Order Fresh 1kg Spool of ASA (Acrylonitrile Styrene Acrylate)
High-speed, tangle-free ASA (Acrylonitrile Styrene Acrylate) filament with ±0.02mm tolerance for reliable prints.
Kitchen Scale Quick-Lookup: ASA (Acrylonitrile Styrene Acrylate) on Inland / Micro Center (Black Plastic)
Read your digital kitchen scale directly. Tare deduction of 248g (Plastic) is already calculated below:
| Spool Status | Total Scale Reading | Net Filament | Remaining Meters | Remaining Feet | Percent Left |
|---|---|---|---|---|---|
| Low Spool | 398g | 150g | 58.3m | 191.3 ft | 15% |
| Quarter Spool | 498g | 250g | 97.1m | 318.6 ft | 25% |
| Half Spool | 748g | 500g | 194.3m | 637.5 ft | 50% |
| Three-Quarter Spool | 998g | 750g | 291.4m | 956 ft | 75% |
| Full 1kg Spool | 1248g | 1000g | 388.6m | 1274.9 ft | 100% |
Inland / Micro Center (Black Plastic) Spool Tare Weight vs Competitors
Compare empty spool tare weights and resulting filament meter yields for ASA (Acrylonitrile Styrene Acrylate) (1.75mm).
| Material / Specification | Empty Tare | Material | 1kg Yield | Flange Dia |
|---|---|---|---|---|
| Inland / Micro Center (Black Plastic)ACTIVE | 248g | Plastic | 388.6m | Ø 200mm |
| Bambu Lab (Reusable Spool) | 250g | Plastic | 388.6m | Ø 200mm |
| eSun (Clear Plastic Spool) | 245g | Plastic | 388.6m | Ø 200mm |
| eSun (Eco Cardboard Spool) | 135g | Cardboard | 388.6m | Ø 200mm |
| Polymaker (Panchroma Cardboard) | 140g | Cardboard | 388.6m | Ø 200mm |
| Prusament (Honeycomb Plastic + Core) | 200g | Plastic | 388.6m | Ø 200mm |
Step-by-Step Math: How We Calculate ASA (Acrylonitrile Styrene Acrylate) Length
Exact formulas and linear density substitutions for ASA (Acrylonitrile Styrene Acrylate) (1.07 g/cm³) on a Inland / Micro Center (Black Plastic) spool.
Deducting the verified 248g empty tare weight of the Inland / Micro Center (Black Plastic) (Plastic) spool leaves the exact net plastic mass.
Volumetric cross-sectional area in square centimeters for 1.75mm filament.
Dividing net mass by the linear density of ASA (Acrylonitrile Styrene Acrylate) (1.07 g/cm³) yields the printable length.
Engineering Specifications & Troubleshooting Guide: ASA (Acrylonitrile Styrene Acrylate) & Inland / Micro Center (Black Plastic) Hardware
Factory-tested parameters, common failure modes, and workbench best practices.
- Premier material for outdoor and automotive parts due to superior UV resistance.
- The empty Inland / Micro Center (Black Plastic) spool weighs 248g (Plastic). Flange outer diameter is 200mm with a 53mm hub bore.
Prying off bed while still hot; wait for bed to cool to 35°C.
Frequently Asked Questions: ASA (Acrylonitrile Styrene Acrylate) on Inland / Micro Center (Black Plastic)
Spool tare weight, density, moisture absorption, and kitchen scale tips.
Q1How much does an empty Inland / Micro Center (Black Plastic) spool weigh?
Q2How many meters of filament are in a 1kg spool of ASA (Acrylonitrile Styrene Acrylate)?
Q3Is the Inland / Micro Center (Black Plastic) spool compatible with the Bambu AMS?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: