PA12 (Nylon 12) on Bambu Lab (Reusable Spool) Spool Tare & Length Calculator
Weigh your Bambu Lab (Reusable Spool) spool on a kitchen scale to instantly see remaining meters, feet, and percentage left for PA12 (Nylon 12) (1.01 g/cm³).
An empty Bambu Lab (Reusable Spool) spool weighs exactly 250g (Plastic). A full 1kg net spool of 1.75mm PA12 (Nylon 12) (density 1.01 g/cm³) contains 411.6 meters (1350.4 feet) of filament.
Input Parameters & Presets
Pre-loads exact volumetric density required to calculate length.
Pre-loads empty spool deduction (Plastic).
Weigh your half-used spool directly on any digital kitchen scale.
100% of 1000g reference spool
Excludes 250g empty tare
8 hrs on Bambu Lab P1S
1.75mm diameter profile
Order Fresh 1kg Spool of PA12 (Nylon 12)
High-speed, tangle-free PA12 (Nylon 12) filament with ±0.02mm tolerance for reliable prints.
Kitchen Scale Quick-Lookup: PA12 (Nylon 12) on Bambu Lab (Reusable Spool)
Read your digital kitchen scale directly. Tare deduction of 250g (Plastic) is already calculated below:
| Spool Status | Total Scale Reading | Net Filament | Remaining Meters | Remaining Feet | Percent Left |
|---|---|---|---|---|---|
| Low Spool | 400g | 150g | 61.7m | 202.4 ft | 15% |
| Quarter Spool | 500g | 250g | 102.9m | 337.6 ft | 25% |
| Half Spool | 750g | 500g | 205.8m | 675.2 ft | 50% |
| Three-Quarter Spool | 1000g | 750g | 308.7m | 1012.8 ft | 75% |
| Full 1kg Spool | 1250g | 1000g | 411.6m | 1350.4 ft | 100% |
Bambu Lab (Reusable Spool) Spool Tare Weight vs Competitors
Compare empty spool tare weights and resulting filament meter yields for PA12 (Nylon 12) (1.75mm).
| Material / Specification | Empty Tare | Material | 1kg Yield | Flange Dia |
|---|---|---|---|---|
| Bambu Lab (Reusable Spool)ACTIVE | 250g | Plastic | 411.6m | Ø 200mm |
| eSun (Clear Plastic Spool) | 245g | Plastic | 411.6m | Ø 200mm |
| eSun (Eco Cardboard Spool) | 135g | Cardboard | 411.6m | Ø 200mm |
| Polymaker (Panchroma Cardboard) | 140g | Cardboard | 411.6m | Ø 200mm |
| Prusament (Honeycomb Plastic + Core) | 200g | Plastic | 411.6m | Ø 200mm |
| Hatchbox 3D (Black Plastic) | 230g | Plastic | 411.6m | Ø 200mm |
Step-by-Step Math: How We Calculate PA12 (Nylon 12) Length
Exact formulas and linear density substitutions for PA12 (Nylon 12) (1.01 g/cm³) on a Bambu Lab (Reusable Spool) spool.
Deducting the verified 250g empty tare weight of the Bambu Lab (Reusable Spool) (Plastic) spool leaves the exact net plastic mass.
Volumetric cross-sectional area in square centimeters for 1.75mm filament.
Dividing net mass by the linear density of PA12 (Nylon 12) (1.01 g/cm³) yields the printable length.
Engineering Specifications & Troubleshooting Guide: PA12 (Nylon 12) & Bambu Lab (Reusable Spool) Hardware
Factory-tested parameters, common failure modes, and workbench best practices.
- Absorbs far less moisture than PA6, retaining high dimensional accuracy.
- The empty Bambu Lab (Reusable Spool) spool weighs 250g (Plastic). Flange outer diameter is 200mm with a 82mm hub bore.
Skipping drying; even 0.3% water content creates nozzle popping.
Frequently Asked Questions: PA12 (Nylon 12) on Bambu Lab (Reusable Spool)
Spool tare weight, density, moisture absorption, and kitchen scale tips.
Q1How much does an empty Bambu Lab (Reusable Spool) spool weigh?
Q2How many meters of filament are in a 1kg spool of PA12 (Nylon 12)?
Q3Is the Bambu Lab (Reusable Spool) spool compatible with the Bambu AMS?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: