PETG (Polyethylene Terephthalate Glycol) on Polymaker (Panchroma Cardboard) Spool Tare & Length Calculator
Weigh your Polymaker (Panchroma Cardboard) spool on a kitchen scale to instantly see remaining meters, feet, and percentage left for PETG (Polyethylene Terephthalate Glycol) (1.27 g/cm³).
An empty Polymaker (Panchroma Cardboard) spool weighs exactly 140g (Cardboard). A full 1kg net spool of 1.75mm PETG (Polyethylene Terephthalate Glycol) (density 1.27 g/cm³) contains 327.4 meters (1074.1 feet) of filament.
Input Parameters & Presets
Pre-loads exact volumetric density required to calculate length.
Pre-loads empty spool deduction (Cardboard).
Weigh your half-used spool directly on any digital kitchen scale.
100% of 1000g reference spool
Excludes 140g empty tare
8 hrs on Bambu Lab P1S
1.75mm diameter profile
Order Fresh 1kg Spool of PETG (Polyethylene Terephthalate Glycol)
High-speed, tangle-free PETG (Polyethylene Terephthalate Glycol) filament with ±0.02mm tolerance for reliable prints.
Kitchen Scale Quick-Lookup: PETG (Polyethylene Terephthalate Glycol) on Polymaker (Panchroma Cardboard)
Read your digital kitchen scale directly. Tare deduction of 140g (Cardboard) is already calculated below:
| Spool Status | Total Scale Reading | Net Filament | Remaining Meters | Remaining Feet | Percent Left |
|---|---|---|---|---|---|
| Low Spool | 290g | 150g | 49.1m | 161.1 ft | 15% |
| Quarter Spool | 390g | 250g | 81.8m | 268.4 ft | 25% |
| Half Spool | 640g | 500g | 163.7m | 537.1 ft | 50% |
| Three-Quarter Spool | 890g | 750g | 245.5m | 805.4 ft | 75% |
| Full 1kg Spool | 1140g | 1000g | 327.4m | 1074.1 ft | 100% |
Polymaker (Panchroma Cardboard) Spool Tare Weight vs Competitors
Compare empty spool tare weights and resulting filament meter yields for PETG (Polyethylene Terephthalate Glycol) (1.75mm).
| Material / Specification | Empty Tare | Material | 1kg Yield | Flange Dia |
|---|---|---|---|---|
| Polymaker (Panchroma Cardboard)ACTIVE | 140g | Cardboard | 327.4m | Ø 200mm |
| Bambu Lab (Reusable Spool) | 250g | Plastic | 327.4m | Ø 200mm |
| eSun (Clear Plastic Spool) | 245g | Plastic | 327.4m | Ø 200mm |
| eSun (Eco Cardboard Spool) | 135g | Cardboard | 327.4m | Ø 200mm |
| Prusament (Honeycomb Plastic + Core) | 200g | Plastic | 327.4m | Ø 200mm |
| Hatchbox 3D (Black Plastic) | 230g | Plastic | 327.4m | Ø 200mm |
Step-by-Step Math: How We Calculate PETG (Polyethylene Terephthalate Glycol) Length
Exact formulas and linear density substitutions for PETG (Polyethylene Terephthalate Glycol) (1.27 g/cm³) on a Polymaker (Panchroma Cardboard) spool.
Deducting the verified 140g empty tare weight of the Polymaker (Panchroma Cardboard) (Cardboard) spool leaves the exact net plastic mass.
Volumetric cross-sectional area in square centimeters for 1.75mm filament.
Dividing net mass by the linear density of PETG (Polyethylene Terephthalate Glycol) (1.27 g/cm³) yields the printable length.
Engineering Specifications & Troubleshooting Guide: PETG (Polyethylene Terephthalate Glycol) & Polymaker (Panchroma Cardboard) Hardware
Factory-tested parameters, common failure modes, and workbench best practices.
- Use glue stick on smooth PEI to prevent PETG from tearing bed coating.
- Drying at 65°C eliminates stringing.
- The empty Polymaker (Panchroma Cardboard) spool weighs 140g (Cardboard). Flange outer diameter is 200mm with a 55mm hub bore.
Running 100% part cooling fan which drastically weakens PETG layer adhesion.
Frequently Asked Questions: PETG (Polyethylene Terephthalate Glycol) on Polymaker (Panchroma Cardboard)
Spool tare weight, density, moisture absorption, and kitchen scale tips.
Q1How much does an empty Polymaker (Panchroma Cardboard) spool weigh?
Q2How many meters of filament are in a 1kg spool of PETG (Polyethylene Terephthalate Glycol)?
Q3Is the Polymaker (Panchroma Cardboard) spool compatible with the Bambu AMS?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: