PLA (Polylactic Acid) on Hatchbox 3D (Black Plastic) Spool Tare & Length Calculator
Weigh your Hatchbox 3D (Black Plastic) spool on a kitchen scale to instantly see remaining meters, feet, and percentage left for PLA (Polylactic Acid) (1.24 g/cm³).
An empty Hatchbox 3D (Black Plastic) spool weighs exactly 230g (Plastic). A full 1kg net spool of 1.75mm PLA (Polylactic Acid) (density 1.24 g/cm³) contains 335.3 meters (1100.1 feet) of filament.
Input Parameters & Presets
Pre-loads exact volumetric density required to calculate length.
Pre-loads empty spool deduction (Plastic).
Weigh your half-used spool directly on any digital kitchen scale.
100% of 1000g reference spool
Excludes 230g empty tare
8 hrs on Bambu Lab P1S
1.75mm diameter profile
Order Fresh 1kg Spool of PLA (Polylactic Acid)
High-speed, tangle-free PLA (Polylactic Acid) filament with ±0.02mm tolerance for reliable prints.
Kitchen Scale Quick-Lookup: PLA (Polylactic Acid) on Hatchbox 3D (Black Plastic)
Read your digital kitchen scale directly. Tare deduction of 230g (Plastic) is already calculated below:
| Spool Status | Total Scale Reading | Net Filament | Remaining Meters | Remaining Feet | Percent Left |
|---|---|---|---|---|---|
| Low Spool | 380g | 150g | 50.3m | 165 ft | 15% |
| Quarter Spool | 480g | 250g | 83.8m | 274.9 ft | 25% |
| Half Spool | 730g | 500g | 167.6m | 549.9 ft | 50% |
| Three-Quarter Spool | 980g | 750g | 251.5m | 825.1 ft | 75% |
| Full 1kg Spool | 1230g | 1000g | 335.3m | 1100.1 ft | 100% |
Hatchbox 3D (Black Plastic) Spool Tare Weight vs Competitors
Compare empty spool tare weights and resulting filament meter yields for PLA (Polylactic Acid) (1.75mm).
| Material / Specification | Empty Tare | Material | 1kg Yield | Flange Dia |
|---|---|---|---|---|
| Hatchbox 3D (Black Plastic)ACTIVE | 230g | Plastic | 335.3m | Ø 200mm |
| Bambu Lab (Reusable Spool) | 250g | Plastic | 335.3m | Ø 200mm |
| eSun (Clear Plastic Spool) | 245g | Plastic | 335.3m | Ø 200mm |
| eSun (Eco Cardboard Spool) | 135g | Cardboard | 335.3m | Ø 200mm |
| Polymaker (Panchroma Cardboard) | 140g | Cardboard | 335.3m | Ø 200mm |
| Prusament (Honeycomb Plastic + Core) | 200g | Plastic | 335.3m | Ø 200mm |
Step-by-Step Math: How We Calculate PLA (Polylactic Acid) Length
Exact formulas and linear density substitutions for PLA (Polylactic Acid) (1.24 g/cm³) on a Hatchbox 3D (Black Plastic) spool.
Deducting the verified 230g empty tare weight of the Hatchbox 3D (Black Plastic) (Plastic) spool leaves the exact net plastic mass.
Volumetric cross-sectional area in square centimeters for 1.75mm filament.
Dividing net mass by the linear density of PLA (Polylactic Acid) (1.24 g/cm³) yields the printable length.
Engineering Specifications & Troubleshooting Guide: PLA (Polylactic Acid) & Hatchbox 3D (Black Plastic) Hardware
Factory-tested parameters, common failure modes, and workbench best practices.
- Keep cooling fan at 100% after layer 2 for crisp overhangs.
- Crack open enclosure door to prevent heat creep.
- The empty Hatchbox 3D (Black Plastic) spool weighs 230g (Plastic). Flange outer diameter is 200mm with a 55mm hub bore.
Printing too hot (>225°C) without adequate cooling, causing droopy bridges.
Frequently Asked Questions: PLA (Polylactic Acid) on Hatchbox 3D (Black Plastic)
Spool tare weight, density, moisture absorption, and kitchen scale tips.
Q1How much does an empty Hatchbox 3D (Black Plastic) spool weigh?
Q2How many meters of filament are in a 1kg spool of PLA (Polylactic Acid)?
Q3Is the Hatchbox 3D (Black Plastic) spool compatible with the Bambu AMS?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: