PLA+ / Tough PLA on Amazon Basics (Black Plastic) Spool Tare & Length Calculator
Weigh your Amazon Basics (Black Plastic) spool on a kitchen scale to instantly see remaining meters, feet, and percentage left for PLA+ / Tough PLA (1.24 g/cm³).
An empty Amazon Basics (Black Plastic) spool weighs exactly 238g (Plastic). A full 1kg net spool of 1.75mm PLA+ / Tough PLA (density 1.24 g/cm³) contains 335.3 meters (1100.1 feet) of filament.
Input Parameters & Presets
Pre-loads exact volumetric density required to calculate length.
Pre-loads empty spool deduction (Plastic).
Weigh your half-used spool directly on any digital kitchen scale.
100% of 1000g reference spool
Excludes 238g empty tare
8 hrs on Bambu Lab P1S
1.75mm diameter profile
Order Fresh 1kg Spool of PLA+ / Tough PLA
High-speed, tangle-free PLA+ / Tough PLA filament with ±0.02mm tolerance for reliable prints.
Kitchen Scale Quick-Lookup: PLA+ / Tough PLA on Amazon Basics (Black Plastic)
Read your digital kitchen scale directly. Tare deduction of 238g (Plastic) is already calculated below:
| Spool Status | Total Scale Reading | Net Filament | Remaining Meters | Remaining Feet | Percent Left |
|---|---|---|---|---|---|
| Low Spool | 388g | 150g | 50.3m | 165 ft | 15% |
| Quarter Spool | 488g | 250g | 83.8m | 274.9 ft | 25% |
| Half Spool | 738g | 500g | 167.6m | 549.9 ft | 50% |
| Three-Quarter Spool | 988g | 750g | 251.5m | 825.1 ft | 75% |
| Full 1kg Spool | 1238g | 1000g | 335.3m | 1100.1 ft | 100% |
Amazon Basics (Black Plastic) Spool Tare Weight vs Competitors
Compare empty spool tare weights and resulting filament meter yields for PLA+ / Tough PLA (1.75mm).
| Material / Specification | Empty Tare | Material | 1kg Yield | Flange Dia |
|---|---|---|---|---|
| Amazon Basics (Black Plastic)ACTIVE | 238g | Plastic | 335.3m | Ø 200mm |
| Bambu Lab (Reusable Spool) | 250g | Plastic | 335.3m | Ø 200mm |
| eSun (Clear Plastic Spool) | 245g | Plastic | 335.3m | Ø 200mm |
| eSun (Eco Cardboard Spool) | 135g | Cardboard | 335.3m | Ø 200mm |
| Polymaker (Panchroma Cardboard) | 140g | Cardboard | 335.3m | Ø 200mm |
| Prusament (Honeycomb Plastic + Core) | 200g | Plastic | 335.3m | Ø 200mm |
Step-by-Step Math: How We Calculate PLA+ / Tough PLA Length
Exact formulas and linear density substitutions for PLA+ / Tough PLA (1.24 g/cm³) on a Amazon Basics (Black Plastic) spool.
Deducting the verified 238g empty tare weight of the Amazon Basics (Black Plastic) (Plastic) spool leaves the exact net plastic mass.
Volumetric cross-sectional area in square centimeters for 1.75mm filament.
Dividing net mass by the linear density of PLA+ / Tough PLA (1.24 g/cm³) yields the printable length.
Engineering Specifications & Troubleshooting Guide: PLA+ / Tough PLA & Amazon Basics (Black Plastic) Hardware
Factory-tested parameters, common failure modes, and workbench best practices.
- Slightly higher temperature enhances layer fusion up to 2x higher impact strength.
- The empty Amazon Basics (Black Plastic) spool weighs 238g (Plastic). Flange outer diameter is 200mm with a 54mm hub bore.
Using generic PLA profiles without bumping nozzle temperature by 10°C.
Frequently Asked Questions: PLA+ / Tough PLA on Amazon Basics (Black Plastic)
Spool tare weight, density, moisture absorption, and kitchen scale tips.
Q1How much does an empty Amazon Basics (Black Plastic) spool weigh?
Q2How many meters of filament are in a 1kg spool of PLA+ / Tough PLA?
Q3Is the Amazon Basics (Black Plastic) spool compatible with the Bambu AMS?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: