PLA+ / Tough PLA on eSun (Eco Cardboard Spool) Spool Tare & Length Calculator
Weigh your eSun (Eco Cardboard Spool) spool on a kitchen scale to instantly see remaining meters, feet, and percentage left for PLA+ / Tough PLA (1.24 g/cm³).
An empty eSun (Eco Cardboard Spool) spool weighs exactly 135g (Cardboard). A full 1kg net spool of 1.75mm PLA+ / Tough PLA (density 1.24 g/cm³) contains 335.3 meters (1100.1 feet) of filament.
Input Parameters & Presets
Pre-loads exact volumetric density required to calculate length.
Pre-loads empty spool deduction (Cardboard).
Weigh your half-used spool directly on any digital kitchen scale.
100% of 1000g reference spool
Excludes 135g empty tare
8 hrs on Bambu Lab P1S
1.75mm diameter profile
Order Fresh 1kg Spool of PLA+ / Tough PLA
High-speed, tangle-free PLA+ / Tough PLA filament with ±0.02mm tolerance for reliable prints.
Kitchen Scale Quick-Lookup: PLA+ / Tough PLA on eSun (Eco Cardboard Spool)
Read your digital kitchen scale directly. Tare deduction of 135g (Cardboard) is already calculated below:
| Spool Status | Total Scale Reading | Net Filament | Remaining Meters | Remaining Feet | Percent Left |
|---|---|---|---|---|---|
| Low Spool | 285g | 150g | 50.3m | 165 ft | 15% |
| Quarter Spool | 385g | 250g | 83.8m | 274.9 ft | 25% |
| Half Spool | 635g | 500g | 167.6m | 549.9 ft | 50% |
| Three-Quarter Spool | 885g | 750g | 251.5m | 825.1 ft | 75% |
| Full 1kg Spool | 1135g | 1000g | 335.3m | 1100.1 ft | 100% |
eSun (Eco Cardboard Spool) Spool Tare Weight vs Competitors
Compare empty spool tare weights and resulting filament meter yields for PLA+ / Tough PLA (1.75mm).
| Material / Specification | Empty Tare | Material | 1kg Yield | Flange Dia |
|---|---|---|---|---|
| eSun (Eco Cardboard Spool)ACTIVE | 135g | Cardboard | 335.3m | Ø 200mm |
| Bambu Lab (Reusable Spool) | 250g | Plastic | 335.3m | Ø 200mm |
| eSun (Clear Plastic Spool) | 245g | Plastic | 335.3m | Ø 200mm |
| Polymaker (Panchroma Cardboard) | 140g | Cardboard | 335.3m | Ø 200mm |
| Prusament (Honeycomb Plastic + Core) | 200g | Plastic | 335.3m | Ø 200mm |
| Hatchbox 3D (Black Plastic) | 230g | Plastic | 335.3m | Ø 200mm |
Step-by-Step Math: How We Calculate PLA+ / Tough PLA Length
Exact formulas and linear density substitutions for PLA+ / Tough PLA (1.24 g/cm³) on a eSun (Eco Cardboard Spool) spool.
Deducting the verified 135g empty tare weight of the eSun (Eco Cardboard Spool) (Cardboard) spool leaves the exact net plastic mass.
Volumetric cross-sectional area in square centimeters for 1.75mm filament.
Dividing net mass by the linear density of PLA+ / Tough PLA (1.24 g/cm³) yields the printable length.
Engineering Specifications & Troubleshooting Guide: PLA+ / Tough PLA & eSun (Eco Cardboard Spool) Hardware
Factory-tested parameters, common failure modes, and workbench best practices.
- Slightly higher temperature enhances layer fusion up to 2x higher impact strength.
- The empty eSun (Eco Cardboard Spool) spool weighs 135g (Cardboard). Flange outer diameter is 200mm with a 54mm hub bore.
Using generic PLA profiles without bumping nozzle temperature by 10°C.
Frequently Asked Questions: PLA+ / Tough PLA on eSun (Eco Cardboard Spool)
Spool tare weight, density, moisture absorption, and kitchen scale tips.
Q1How much does an empty eSun (Eco Cardboard Spool) spool weigh?
Q2How many meters of filament are in a 1kg spool of PLA+ / Tough PLA?
Q3Is the eSun (Eco Cardboard Spool) spool compatible with the Bambu AMS?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: