TPU 95A (Flexible Elastomer) on Sunlu (Slotted Plastic Spool) Spool Tare & Length Calculator
Weigh your Sunlu (Slotted Plastic Spool) spool on a kitchen scale to instantly see remaining meters, feet, and percentage left for TPU 95A (Flexible Elastomer) (1.21 g/cm³).
An empty Sunlu (Slotted Plastic Spool) spool weighs exactly 210g (Plastic). A full 1kg net spool of 1.75mm TPU 95A (Flexible Elastomer) (density 1.21 g/cm³) contains 343.6 meters (1127.3 feet) of filament.
Input Parameters & Presets
Pre-loads exact volumetric density required to calculate length.
Pre-loads empty spool deduction (Plastic).
Weigh your half-used spool directly on any digital kitchen scale.
100% of 1000g reference spool
Excludes 210g empty tare
8 hrs on Bambu Lab P1S
1.75mm diameter profile
Order Fresh 1kg Spool of TPU 95A (Flexible Elastomer)
High-speed, tangle-free TPU 95A (Flexible Elastomer) filament with ±0.02mm tolerance for reliable prints.
Kitchen Scale Quick-Lookup: TPU 95A (Flexible Elastomer) on Sunlu (Slotted Plastic Spool)
Read your digital kitchen scale directly. Tare deduction of 210g (Plastic) is already calculated below:
| Spool Status | Total Scale Reading | Net Filament | Remaining Meters | Remaining Feet | Percent Left |
|---|---|---|---|---|---|
| Low Spool | 360g | 150g | 51.5m | 169 ft | 15% |
| Quarter Spool | 460g | 250g | 85.9m | 281.8 ft | 25% |
| Half Spool | 710g | 500g | 171.8m | 563.6 ft | 50% |
| Three-Quarter Spool | 960g | 750g | 257.7m | 845.5 ft | 75% |
| Full 1kg Spool | 1210g | 1000g | 343.6m | 1127.3 ft | 100% |
Sunlu (Slotted Plastic Spool) Spool Tare Weight vs Competitors
Compare empty spool tare weights and resulting filament meter yields for TPU 95A (Flexible Elastomer) (1.75mm).
| Material / Specification | Empty Tare | Material | 1kg Yield | Flange Dia |
|---|---|---|---|---|
| Sunlu (Slotted Plastic Spool)ACTIVE | 210g | Plastic | 343.6m | Ø 200mm |
| Bambu Lab (Reusable Spool) | 250g | Plastic | 343.6m | Ø 200mm |
| eSun (Clear Plastic Spool) | 245g | Plastic | 343.6m | Ø 200mm |
| eSun (Eco Cardboard Spool) | 135g | Cardboard | 343.6m | Ø 200mm |
| Polymaker (Panchroma Cardboard) | 140g | Cardboard | 343.6m | Ø 200mm |
| Prusament (Honeycomb Plastic + Core) | 200g | Plastic | 343.6m | Ø 200mm |
Step-by-Step Math: How We Calculate TPU 95A (Flexible Elastomer) Length
Exact formulas and linear density substitutions for TPU 95A (Flexible Elastomer) (1.21 g/cm³) on a Sunlu (Slotted Plastic Spool) spool.
Deducting the verified 210g empty tare weight of the Sunlu (Slotted Plastic Spool) (Plastic) spool leaves the exact net plastic mass.
Volumetric cross-sectional area in square centimeters for 1.75mm filament.
Dividing net mass by the linear density of TPU 95A (Flexible Elastomer) (1.21 g/cm³) yields the printable length.
Engineering Specifications & Troubleshooting Guide: TPU 95A (Flexible Elastomer) & Sunlu (Slotted Plastic Spool) Hardware
Factory-tested parameters, common failure modes, and workbench best practices.
- Print slowly (25-45 mm/s) to prevent filament buckling in drive gears.
- The empty Sunlu (Slotted Plastic Spool) spool weighs 210g (Plastic). Flange outer diameter is 200mm with a 73mm hub bore.
High retraction settings causing grinding in the extruder gears.
Frequently Asked Questions: TPU 95A (Flexible Elastomer) on Sunlu (Slotted Plastic Spool)
Spool tare weight, density, moisture absorption, and kitchen scale tips.
Q1How much does an empty Sunlu (Slotted Plastic Spool) spool weigh?
Q2How many meters of filament are in a 1kg spool of TPU 95A (Flexible Elastomer)?
Q3Is the Sunlu (Slotted Plastic Spool) spool compatible with the Bambu AMS?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: