ULTEM 9085 / PEI (Aerospace High Temp) on Bambu Lab (Reusable Spool) Spool Tare & Length Calculator
Weigh your Bambu Lab (Reusable Spool) spool on a kitchen scale to instantly see remaining meters, feet, and percentage left for ULTEM 9085 / PEI (Aerospace High Temp) (1.34 g/cm³).
An empty Bambu Lab (Reusable Spool) spool weighs exactly 250g (Plastic). A full 1kg net spool of 1.75mm ULTEM 9085 / PEI (Aerospace High Temp) (density 1.34 g/cm³) contains 310.3 meters (1018 feet) of filament.
Input Parameters & Presets
Pre-loads exact volumetric density required to calculate length.
Pre-loads empty spool deduction (Plastic).
Weigh your half-used spool directly on any digital kitchen scale.
100% of 1000g reference spool
Excludes 250g empty tare
8 hrs on Bambu Lab P1S
1.75mm diameter profile
Order Fresh 1kg Spool of ULTEM 9085 / PEI (Aerospace High Temp)
High-speed, tangle-free ULTEM 9085 / PEI (Aerospace High Temp) filament with ±0.02mm tolerance for reliable prints.
Kitchen Scale Quick-Lookup: ULTEM 9085 / PEI (Aerospace High Temp) on Bambu Lab (Reusable Spool)
Read your digital kitchen scale directly. Tare deduction of 250g (Plastic) is already calculated below:
| Spool Status | Total Scale Reading | Net Filament | Remaining Meters | Remaining Feet | Percent Left |
|---|---|---|---|---|---|
| Low Spool | 400g | 150g | 46.5m | 152.6 ft | 15% |
| Quarter Spool | 500g | 250g | 77.6m | 254.6 ft | 25% |
| Half Spool | 750g | 500g | 155.1m | 508.9 ft | 50% |
| Three-Quarter Spool | 1000g | 750g | 232.7m | 763.5 ft | 75% |
| Full 1kg Spool | 1250g | 1000g | 310.3m | 1018 ft | 100% |
Bambu Lab (Reusable Spool) Spool Tare Weight vs Competitors
Compare empty spool tare weights and resulting filament meter yields for ULTEM 9085 / PEI (Aerospace High Temp) (1.75mm).
| Material / Specification | Empty Tare | Material | 1kg Yield | Flange Dia |
|---|---|---|---|---|
| Bambu Lab (Reusable Spool)ACTIVE | 250g | Plastic | 310.3m | Ø 200mm |
| eSun (Clear Plastic Spool) | 245g | Plastic | 310.3m | Ø 200mm |
| eSun (Eco Cardboard Spool) | 135g | Cardboard | 310.3m | Ø 200mm |
| Polymaker (Panchroma Cardboard) | 140g | Cardboard | 310.3m | Ø 200mm |
| Prusament (Honeycomb Plastic + Core) | 200g | Plastic | 310.3m | Ø 200mm |
| Hatchbox 3D (Black Plastic) | 230g | Plastic | 310.3m | Ø 200mm |
Step-by-Step Math: How We Calculate ULTEM 9085 / PEI (Aerospace High Temp) Length
Exact formulas and linear density substitutions for ULTEM 9085 / PEI (Aerospace High Temp) (1.34 g/cm³) on a Bambu Lab (Reusable Spool) spool.
Deducting the verified 250g empty tare weight of the Bambu Lab (Reusable Spool) (Plastic) spool leaves the exact net plastic mass.
Volumetric cross-sectional area in square centimeters for 1.75mm filament.
Dividing net mass by the linear density of ULTEM 9085 / PEI (Aerospace High Temp) (1.34 g/cm³) yields the printable length.
Engineering Specifications & Troubleshooting Guide: ULTEM 9085 / PEI (Aerospace High Temp) & Bambu Lab (Reusable Spool) Hardware
Factory-tested parameters, common failure modes, and workbench best practices.
- FAA compliant for aircraft cabin interiors; requires 180°C chamber temperature.
- The empty Bambu Lab (Reusable Spool) spool weighs 250g (Plastic). Flange outer diameter is 200mm with a 82mm hub bore.
Attempting to print on non-industrial machines without active high-temp chambers.
Frequently Asked Questions: ULTEM 9085 / PEI (Aerospace High Temp) on Bambu Lab (Reusable Spool)
Spool tare weight, density, moisture absorption, and kitchen scale tips.
Q1How much does an empty Bambu Lab (Reusable Spool) spool weigh?
Q2How many meters of filament are in a 1kg spool of ULTEM 9085 / PEI (Aerospace High Temp)?
Q3Is the Bambu Lab (Reusable Spool) spool compatible with the Bambu AMS?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: