Bambu Lab P1S Print Job Cost & Electricity Calculator
Pre-loads 110W average power draw to estimate exact electricity and material filament costs for the Bambu Lab P1S.
The Bambu Lab P1S draws an average of 110 Watts during printing. At standard US electricity rates ($0.16/kWh), a 10-hour print consumes 1.1 kWh costing just $0.18 in power.
Input Parameters & Presets
Pre-loads exact volumetric density required to calculate length.
Pre-loads empty spool deduction (Plastic).
Weigh your half-used spool directly on any digital kitchen scale.
100% of 1000g reference spool
Excludes 250g empty tare
8 hrs on Bambu Lab P1S
1.75mm diameter profile
Order Fresh 1kg Spool of PLA (Polylactic Acid)
High-speed, tangle-free PLA (Polylactic Acid) filament with ±0.02mm tolerance for reliable prints.
Bambu Lab P1S Power Draw vs Other 3D Printers
Compare wattage consumption and 10-hour electricity cost across popular 3D printers.
| Material / Specification | Average Power | 10-Hour Cost | Bed Size | Enclosure |
|---|---|---|---|---|
| Bambu Lab P1SACTIVE | 110W | 0.18 | 256×256×256 mm | Enclosed |
| Bambu Lab P1P | 95W | 0.15 | 256×256×256 mm | Open Frame |
| Bambu Lab X1-Carbon (X1C) | 125W | 0.2 | 256×256×256 mm | Enclosed |
| Bambu Lab X1E | 180W | 0.29 | 256×256×256 mm | Enclosed |
| Bambu Lab A1 | 90W | 0.14 | 256×256×256 mm | Open Frame |
| Bambu Lab A1 Mini | 60W | 0.1 | 180×180×180 mm | Open Frame |
Energy Formula Breakdown: Bambu Lab P1S
How electrical power and material usage combine to determine true 3D printing cost.
Multiplies average power draw of the Bambu Lab P1S by print duration to determine energy units.
Standard residential utility cost in North America ($0.16/kWh).
This page calculates electricity only. Do not treat the result as a complete print cost until material consumption and price are supplied separately.
Engineering Specifications & Troubleshooting Guide: Bambu Lab P1S
Factory-tested parameters, common failure modes, and workbench best practices.
- Heated enclosed chamber keeps ABS/ASA flat.
- Average 110W for PLA at 55°C bed.
Overestimating electricity cost while underestimating print failure costs. On the Bambu Lab P1S, power costs mere pennies compared to a failed 300g filament print.
Frequently Asked Questions: Bambu Lab P1S
Power consumption, operating electricity costs, spool capacity, and build volumes.
Q1How much electricity does the Bambu Lab P1S use?
Q2What is the bed size of the Bambu Lab P1S?
Q3How can I lower the print cost on the Bambu Lab P1S?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: