Sovol SV06 Print Job Cost & Electricity Calculator
Pre-loads 80W average power draw to estimate exact electricity and material filament costs for the Sovol SV06.
The Sovol SV06 draws an average of 80 Watts during printing. At standard US electricity rates ($0.16/kWh), a 10-hour print consumes 0.8 kWh costing just $0.13 in power.
Input Parameters & Presets
Pre-loads exact volumetric density required to calculate length.
Pre-loads empty spool deduction (Plastic).
Weigh your half-used spool directly on any digital kitchen scale.
100% of 1000g reference spool
Excludes 250g empty tare
8 hrs on Sovol SV06
1.75mm diameter profile
Order Fresh 1kg Spool of PLA (Polylactic Acid)
High-speed, tangle-free PLA (Polylactic Acid) filament with ±0.02mm tolerance for reliable prints.
Sovol SV06 Power Draw vs Other 3D Printers
Compare wattage consumption and 10-hour electricity cost across popular 3D printers.
| Material / Specification | Average Power | 10-Hour Cost | Bed Size | Enclosure |
|---|---|---|---|---|
| Sovol SV06ACTIVE | 80W | 0.13 | 223×223×250 mm | Open Frame |
| Bambu Lab P1S | 110W | 0.18 | 256×256×256 mm | Enclosed |
| Bambu Lab P1P | 95W | 0.15 | 256×256×256 mm | Open Frame |
| Bambu Lab X1-Carbon (X1C) | 125W | 0.2 | 256×256×256 mm | Enclosed |
| Bambu Lab X1E | 180W | 0.29 | 256×256×256 mm | Enclosed |
| Bambu Lab A1 | 90W | 0.14 | 256×256×256 mm | Open Frame |
Energy Formula Breakdown: Sovol SV06
How electrical power and material usage combine to determine true 3D printing cost.
Multiplies average power draw of the Sovol SV06 by print duration to determine energy units.
Standard residential utility cost in North America ($0.16/kWh).
This page calculates electricity only. Do not treat the result as a complete print cost until material consumption and price are supplied separately.
Engineering Specifications & Troubleshooting Guide: Sovol SV06
Factory-tested parameters, common failure modes, and workbench best practices.
- All-metal planetary direct drive inspired by Prusa MK3.
Overestimating electricity cost while underestimating print failure costs. On the Sovol SV06, power costs mere pennies compared to a failed 300g filament print.
Frequently Asked Questions: Sovol SV06
Power consumption, operating electricity costs, spool capacity, and build volumes.
Q1How much electricity does the Sovol SV06 use?
Q2What is the bed size of the Sovol SV06?
Q3How can I lower the print cost on the Sovol SV06?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: