Glow in the Dark PLA (Phosphorescent) on eSun (Clear Plastic Spool) Spool Tare & Length Calculator
Weigh your eSun (Clear Plastic Spool) spool on a kitchen scale to instantly see remaining meters, feet, and percentage left for Glow in the Dark PLA (Phosphorescent) (1.25 g/cm³).
An empty eSun (Clear Plastic Spool) spool weighs exactly 245g (Plastic). A full 1kg net spool of 1.75mm Glow in the Dark PLA (Phosphorescent) (density 1.25 g/cm³) contains 332.6 meters (1091.2 feet) of filament.
Input Parameters & Presets
Pre-loads exact volumetric density required to calculate length.
Pre-loads empty spool deduction (Plastic).
Weigh your half-used spool directly on any digital kitchen scale.
100% of 1000g reference spool
Excludes 245g empty tare
8 hrs on Bambu Lab P1S
1.75mm diameter profile
Order Fresh 1kg Spool of Glow in the Dark PLA (Phosphorescent)
High-speed, tangle-free Glow in the Dark PLA (Phosphorescent) filament with ±0.02mm tolerance for reliable prints.
Kitchen Scale Quick-Lookup: Glow in the Dark PLA (Phosphorescent) on eSun (Clear Plastic Spool)
Read your digital kitchen scale directly. Tare deduction of 245g (Plastic) is already calculated below:
| Spool Status | Total Scale Reading | Net Filament | Remaining Meters | Remaining Feet | Percent Left |
|---|---|---|---|---|---|
| Low Spool | 395g | 150g | 49.9m | 163.7 ft | 15% |
| Quarter Spool | 495g | 250g | 83.2m | 273 ft | 25% |
| Half Spool | 745g | 500g | 166.3m | 545.6 ft | 50% |
| Three-Quarter Spool | 995g | 750g | 249.5m | 818.6 ft | 75% |
| Full 1kg Spool | 1245g | 1000g | 332.6m | 1091.2 ft | 100% |
eSun (Clear Plastic Spool) Spool Tare Weight vs Competitors
Compare empty spool tare weights and resulting filament meter yields for Glow in the Dark PLA (Phosphorescent) (1.75mm).
| Material / Specification | Empty Tare | Material | 1kg Yield | Flange Dia |
|---|---|---|---|---|
| eSun (Clear Plastic Spool)ACTIVE | 245g | Plastic | 332.6m | Ø 200mm |
| Bambu Lab (Reusable Spool) | 250g | Plastic | 332.6m | Ø 200mm |
| eSun (Eco Cardboard Spool) | 135g | Cardboard | 332.6m | Ø 200mm |
| Polymaker (Panchroma Cardboard) | 140g | Cardboard | 332.6m | Ø 200mm |
| Prusament (Honeycomb Plastic + Core) | 200g | Plastic | 332.6m | Ø 200mm |
| Hatchbox 3D (Black Plastic) | 230g | Plastic | 332.6m | Ø 200mm |
Step-by-Step Math: How We Calculate Glow in the Dark PLA (Phosphorescent) Length
Exact formulas and linear density substitutions for Glow in the Dark PLA (Phosphorescent) (1.25 g/cm³) on a eSun (Clear Plastic Spool) spool.
Deducting the verified 245g empty tare weight of the eSun (Clear Plastic Spool) (Plastic) spool leaves the exact net plastic mass.
Volumetric cross-sectional area in square centimeters for 1.75mm filament.
Dividing net mass by the linear density of Glow in the Dark PLA (Phosphorescent) (1.25 g/cm³) yields the printable length.
Engineering Specifications & Troubleshooting Guide: Glow in the Dark PLA (Phosphorescent) & eSun (Clear Plastic Spool) Hardware
Factory-tested parameters, common failure modes, and workbench best practices.
- Contains strontium aluminate micro-crystals; charges quickly under UV blacklight.
- The empty eSun (Clear Plastic Spool) spool weighs 245g (Plastic). Flange outer diameter is 200mm with a 53mm hub bore.
Using standard brass nozzles; phosphorescent particles ruin brass nozzles within 250g.
Frequently Asked Questions: Glow in the Dark PLA (Phosphorescent) on eSun (Clear Plastic Spool)
Spool tare weight, density, moisture absorption, and kitchen scale tips.
Q1How much does an empty eSun (Clear Plastic Spool) spool weigh?
Q2How many meters of filament are in a 1kg spool of Glow in the Dark PLA (Phosphorescent)?
Q3Is the eSun (Clear Plastic Spool) spool compatible with the Bambu AMS?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: