Wood Fill PLA on eSun (Clear Plastic Spool) Spool Tare & Length Calculator
Weigh your eSun (Clear Plastic Spool) spool on a kitchen scale to instantly see remaining meters, feet, and percentage left for Wood Fill PLA (1.15 g/cm³).
An empty eSun (Clear Plastic Spool) spool weighs exactly 245g (Plastic). A full 1kg net spool of 1.75mm Wood Fill PLA (density 1.15 g/cm³) contains 361.5 meters (1186 feet) of filament.
Input Parameters & Presets
Pre-loads exact volumetric density required to calculate length.
Pre-loads empty spool deduction (Plastic).
Weigh your half-used spool directly on any digital kitchen scale.
100% of 1000g reference spool
Excludes 245g empty tare
8 hrs on Bambu Lab P1S
1.75mm diameter profile
Order Fresh 1kg Spool of Wood Fill PLA
High-speed, tangle-free Wood Fill PLA filament with ±0.02mm tolerance for reliable prints.
Kitchen Scale Quick-Lookup: Wood Fill PLA on eSun (Clear Plastic Spool)
Read your digital kitchen scale directly. Tare deduction of 245g (Plastic) is already calculated below:
| Spool Status | Total Scale Reading | Net Filament | Remaining Meters | Remaining Feet | Percent Left |
|---|---|---|---|---|---|
| Low Spool | 395g | 150g | 54.2m | 177.8 ft | 15% |
| Quarter Spool | 495g | 250g | 90.4m | 296.6 ft | 25% |
| Half Spool | 745g | 500g | 180.8m | 593.2 ft | 50% |
| Three-Quarter Spool | 995g | 750g | 271.1m | 889.4 ft | 75% |
| Full 1kg Spool | 1245g | 1000g | 361.5m | 1186 ft | 100% |
eSun (Clear Plastic Spool) Spool Tare Weight vs Competitors
Compare empty spool tare weights and resulting filament meter yields for Wood Fill PLA (1.75mm).
| Material / Specification | Empty Tare | Material | 1kg Yield | Flange Dia |
|---|---|---|---|---|
| eSun (Clear Plastic Spool)ACTIVE | 245g | Plastic | 361.5m | Ø 200mm |
| Bambu Lab (Reusable Spool) | 250g | Plastic | 361.5m | Ø 200mm |
| eSun (Eco Cardboard Spool) | 135g | Cardboard | 361.5m | Ø 200mm |
| Polymaker (Panchroma Cardboard) | 140g | Cardboard | 361.5m | Ø 200mm |
| Prusament (Honeycomb Plastic + Core) | 200g | Plastic | 361.5m | Ø 200mm |
| Hatchbox 3D (Black Plastic) | 230g | Plastic | 361.5m | Ø 200mm |
Step-by-Step Math: How We Calculate Wood Fill PLA Length
Exact formulas and linear density substitutions for Wood Fill PLA (1.15 g/cm³) on a eSun (Clear Plastic Spool) spool.
Deducting the verified 245g empty tare weight of the eSun (Clear Plastic Spool) (Plastic) spool leaves the exact net plastic mass.
Volumetric cross-sectional area in square centimeters for 1.75mm filament.
Dividing net mass by the linear density of Wood Fill PLA (1.15 g/cm³) yields the printable length.
Engineering Specifications & Troubleshooting Guide: Wood Fill PLA & eSun (Clear Plastic Spool) Hardware
Factory-tested parameters, common failure modes, and workbench best practices.
- Contains real micro-timber fibers; can be sanded, stained, and clear-coated like real wood.
- The empty eSun (Clear Plastic Spool) spool weighs 245g (Plastic). Flange outer diameter is 200mm with a 53mm hub bore.
Using a 0.4mm nozzle with high retractions; use 0.5mm or 0.6mm nozzle.
Frequently Asked Questions: Wood Fill PLA on eSun (Clear Plastic Spool)
Spool tare weight, density, moisture absorption, and kitchen scale tips.
Q1How much does an empty eSun (Clear Plastic Spool) spool weigh?
Q2How many meters of filament are in a 1kg spool of Wood Fill PLA?
Q3Is the eSun (Clear Plastic Spool) spool compatible with the Bambu AMS?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: