Deep Pour River Epoxy (2:1 Ratio) for Shallow Tray / Coaster Mold Calculator
Pre-loads specific gravity (1.11) and 2:1 mix ratio to calculate exact Part A & Part B weights with cup scraping buffer.
A standard Shallow Tray / Coaster Mold (20 × 15 × 2 cm minus 150 cm³ master) requires 540g (19.03 oz / 1.19 lbs) of Deep Pour River Epoxy (2:1 Ratio). Mix 359.6g Part A with 179.8g Part B (8% buffer included).
Casting Material & Volume Mode
Pre-loads specific gravity and 2:1 ratio by weight.
Geometry determines the container-volume formula. Use water displacement when the cavity is irregular.
Volume displaced by your master object inside the box.
Compensates for resin clinging to mixing paddles and cup walls (8% recommended).
Includes 8% waste buffer at SG 1.11
Ratio part: 2
Ratio part: 1
Net volume before buffer
Order Deep Pour River Epoxy (2:1 Ratio) Kit
High-tear strength Deep Pour River Epoxy (2:1 Ratio) with verified 2:1 ratio. Ideal for bubble-free casting.
Deep Pour River Epoxy (2:1 Ratio) vs Alternative Casting Compounds
Compare specific gravities, mix ratios, working times, and cure speeds across casting compounds.
| Material / Specification | Specific Gravity | Mix Ratio | Pot Life | Demold Time |
|---|---|---|---|---|
| Deep Pour River Epoxy (2:1 Ratio)ACTIVE | 1.11 | 2:1 (weight) | 90 min | 48 hrs |
| RTV-2 Platinum Silicone (Smooth-On Mold Star 15/30) | 1.07 | 1:1 (weight) | 30 min | 6 hrs |
| RTV-2 Tin Cure Silicone (Condensation Cure) | 1.12 | 10:1 (weight) | 45 min | 12 hrs |
| Jesmonite AC100 (Eco-Resin) | 1.75 | 2.5:1 (weight) | 12 min | 2 hrs |
| Jesmonite AC730 (Stone Casting) | 1.85 | 5:1 (weight) | 15 min | 4 hrs |
| Table Top & Art Epoxy (1:1 Ratio) | 1.08 | 1:1 (weight) | 25 min | 12 hrs |
Step-by-Step Mix Ratio Derivation: Deep Pour River Epoxy (2:1 Ratio)
How displacement volume, specific gravity, and ratio split combine into final scale weights.
Calculates the empty fluid cavity by taking the gross 600 cm³ tray containment volume and deducting the 150 cm³ displaced by the master model.
Multiplies fluid volume by the specific gravity of Deep Pour River Epoxy (2:1 Ratio) (1.11 g/cm³) plus an 8% buffer for cup scraping and pouring loss.
Distributes batch mass according to the exact 2:1 ratio by weight.
Engineering Specifications & Troubleshooting Guide: Deep Pour River Epoxy (2:1 Ratio)
Factory-tested parameters, common failure modes, and workbench best practices.
- Specially formulated with ultra-low viscosity and slow exothermic release for single pours up to 2 inches (50mm) deep.
- Keep workshop temperature strictly between 20°C - 22°C (68°F - 72°F); hotter ambient will cause an exothermic runaway boil.
- Pass a propane torch or heat gun lightly over the surface 15 minutes after pouring to pop rising bubbles.
Pouring deeper than recommended in hot weather (>26°C), resulting in thermal yellowing, cracking, and smoke.
Frequently Asked Questions: Deep Pour River Epoxy (2:1 Ratio)
Mix ratios, degas guidelines, cure times, and mold making tips.
Q1What is the mix ratio of Deep Pour River Epoxy (2:1 Ratio)?
Q2How much Deep Pour River Epoxy (2:1 Ratio) do I need for a Shallow Tray / Coaster Mold?
Q3How long before I can demold Deep Pour River Epoxy (2:1 Ratio)?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: