Dragon Skin FX-Pro (Prosthetic Silicone) for Custom Geometric Block Calculator
Pre-loads specific gravity (1.07) and 1:1 mix ratio to calculate exact Part A & Part B weights with cup scraping buffer.
A standard Custom Geometric Block (12 × 12 × 8 cm minus 150 cm³ master) requires 1158g (40.84 oz / 2.55 lbs) of Dragon Skin FX-Pro (Prosthetic Silicone). Mix 579g Part A with 579g Part B (8% buffer included).
Casting Material & Volume Mode
Pre-loads specific gravity and 1:1 ratio by weight.
Geometry determines the container-volume formula. Use water displacement when the cavity is irregular.
Volume displaced by your master object inside the box.
Compensates for resin clinging to mixing paddles and cup walls (8% recommended).
Includes 8% waste buffer at SG 1.07
Ratio part: 1
Ratio part: 1
Net volume before buffer
Order Dragon Skin FX-Pro (Prosthetic Silicone) Kit
High-tear strength Dragon Skin FX-Pro (Prosthetic Silicone) with verified 1:1 ratio. Ideal for bubble-free casting.
Dragon Skin FX-Pro (Prosthetic Silicone) vs Alternative Casting Compounds
Compare specific gravities, mix ratios, working times, and cure speeds across casting compounds.
| Material / Specification | Specific Gravity | Mix Ratio | Pot Life | Demold Time |
|---|---|---|---|---|
| Dragon Skin FX-Pro (Prosthetic Silicone)ACTIVE | 1.07 | 1:1 (weight) | 12 min | 0.75 hrs |
| RTV-2 Platinum Silicone (Smooth-On Mold Star 15/30) | 1.07 | 1:1 (weight) | 30 min | 6 hrs |
| RTV-2 Tin Cure Silicone (Condensation Cure) | 1.12 | 10:1 (weight) | 45 min | 12 hrs |
| Jesmonite AC100 (Eco-Resin) | 1.75 | 2.5:1 (weight) | 12 min | 2 hrs |
| Jesmonite AC730 (Stone Casting) | 1.85 | 5:1 (weight) | 15 min | 4 hrs |
| Deep Pour River Epoxy (2:1 Ratio) | 1.11 | 2:1 (weight) | 90 min | 48 hrs |
Step-by-Step Mix Ratio Derivation: Dragon Skin FX-Pro (Prosthetic Silicone)
How displacement volume, specific gravity, and ratio split combine into final scale weights.
Calculates the empty fluid cavity by taking the gross 1152 cm³ box containment volume and deducting the 150 cm³ displaced by the master model.
Multiplies fluid volume by the specific gravity of Dragon Skin FX-Pro (Prosthetic Silicone) (1.07 g/cm³) plus an 8% buffer for cup scraping and pouring loss.
Distributes batch mass according to the exact 1:1 ratio by weight.
Engineering Specifications & Troubleshooting Guide: Dragon Skin FX-Pro (Prosthetic Silicone)
Factory-tested parameters, common failure modes, and workbench best practices.
- Soft, high-stretch platinum silicone engineered for hyper-realistic special effects prosthetics and animatronics.
- Add SLACKER deadener to soften into human flesh-like tactile feel.
- Cures in only 40 minutes at room temperature.
Applying over latex or skin oils without barrier seals, causing sticky uncured spots.
Frequently Asked Questions: Dragon Skin FX-Pro (Prosthetic Silicone)
Mix ratios, degas guidelines, cure times, and mold making tips.
Q1What is the mix ratio of Dragon Skin FX-Pro (Prosthetic Silicone)?
Q2How much Dragon Skin FX-Pro (Prosthetic Silicone) do I need for a Custom Geometric Block?
Q3How long before I can demold Dragon Skin FX-Pro (Prosthetic Silicone)?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: