Table Top & Art Epoxy (1:1 Ratio) for Shallow Tray / Coaster Mold Calculator
Pre-loads specific gravity (1.08) and 1:1 mix ratio to calculate exact Part A & Part B weights with cup scraping buffer.
A standard Shallow Tray / Coaster Mold (20 × 15 × 2 cm minus 150 cm³ master) requires 525g (18.51 oz / 1.16 lbs) of Table Top & Art Epoxy (1:1 Ratio). Mix 262.4g Part A with 262.4g Part B (8% buffer included).
Casting Material & Volume Mode
Pre-loads specific gravity and 1:1 ratio by weight.
Geometry determines the container-volume formula. Use water displacement when the cavity is irregular.
Volume displaced by your master object inside the box.
Compensates for resin clinging to mixing paddles and cup walls (8% recommended).
Includes 8% waste buffer at SG 1.08
Ratio part: 1
Ratio part: 1
Net volume before buffer
Order Table Top & Art Epoxy (1:1 Ratio) Kit
High-tear strength Table Top & Art Epoxy (1:1 Ratio) with verified 1:1 ratio. Ideal for bubble-free casting.
Table Top & Art Epoxy (1:1 Ratio) vs Alternative Casting Compounds
Compare specific gravities, mix ratios, working times, and cure speeds across casting compounds.
| Material / Specification | Specific Gravity | Mix Ratio | Pot Life | Demold Time |
|---|---|---|---|---|
| Table Top & Art Epoxy (1:1 Ratio)ACTIVE | 1.08 | 1:1 (weight) | 25 min | 12 hrs |
| RTV-2 Platinum Silicone (Smooth-On Mold Star 15/30) | 1.07 | 1:1 (weight) | 30 min | 6 hrs |
| RTV-2 Tin Cure Silicone (Condensation Cure) | 1.12 | 10:1 (weight) | 45 min | 12 hrs |
| Jesmonite AC100 (Eco-Resin) | 1.75 | 2.5:1 (weight) | 12 min | 2 hrs |
| Jesmonite AC730 (Stone Casting) | 1.85 | 5:1 (weight) | 15 min | 4 hrs |
| Deep Pour River Epoxy (2:1 Ratio) | 1.11 | 2:1 (weight) | 90 min | 48 hrs |
Step-by-Step Mix Ratio Derivation: Table Top & Art Epoxy (1:1 Ratio)
How displacement volume, specific gravity, and ratio split combine into final scale weights.
Calculates the empty fluid cavity by taking the gross 600 cm³ tray containment volume and deducting the 150 cm³ displaced by the master model.
Multiplies fluid volume by the specific gravity of Table Top & Art Epoxy (1:1 Ratio) (1.08 g/cm³) plus an 8% buffer for cup scraping and pouring loss.
Distributes batch mass according to the exact 1:1 ratio by weight.
Engineering Specifications & Troubleshooting Guide: Table Top & Art Epoxy (1:1 Ratio)
Factory-tested parameters, common failure modes, and workbench best practices.
- High-viscosity, self-leveling coating epoxy designed for shallow pours up to 1/4 inch (6mm) max per layer.
- Mix ratio 1:1 by volume or 100A : 85B by weight. Always verify the manufacturer's exact weight-vs-volume spec.
- Produces a high-gloss, scratch-resistant glass-like finish on countertops, bar tops, and coasters.
Pouring deeper than 3/8 inch in a single pass; table-top epoxy will overheat, boil, and turn cloudy yellow.
Frequently Asked Questions: Table Top & Art Epoxy (1:1 Ratio)
Mix ratios, degas guidelines, cure times, and mold making tips.
Q1What is the mix ratio of Table Top & Art Epoxy (1:1 Ratio)?
Q2How much Table Top & Art Epoxy (1:1 Ratio) do I need for a Shallow Tray / Coaster Mold?
Q3How long before I can demold Table Top & Art Epoxy (1:1 Ratio)?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: