Blum Movento 760H (High Capacity) Drawer Box & Clearance Calculator
Pre-loads 42.5mm (1.673") width deduction and 13mm bottom recess to output exact saw cut-sheets for cabinet drawer boxes.
For a standard 24.00" (609.6mm) cabinet opening using Blum Movento 760H (High Capacity), build the outside drawer box width to exactly 22 5/16" (567.1mm). Front/Back sub-fronts cut at 21 1/16" with a 1/2" (13mm) bottom recess notch.
Cabinet Opening & Slide Hardware
Pre-loads exact manufacturer deduction (1.673") and bottom recess.
Exact clear opening measured between cabinet face-frame or sidewalls.
Selects a 21" nominal runner length while preserving cabinet rear clearance.
Opening 24" minus 1.673" hardware clearance
Saw cut between 2 sides
Clearance top & bottom
Workshop Saw Cut-List (Dadoed Bottom)
- 2x Drawer Sides:21" × 4 13/16"
- 2x Front / Back Sub:21 1/16" × 4 13/16"
- 1x Bottom Panel:21 9/16" × 20 1/4"
- Bottom Recess / Dado:1/2" recess; 6.35mm dado depth
Order Blum Movento 760H (High Capacity) Runners
Genuine full-extension runners with integrated soft-close dampers and locking device clips.
Blum Movento 760H (High Capacity) Clearance vs Competing Slides
Compare width deductions, bottom recesses, and max side thicknesses across slide runners.
| Material / Specification | Width Deduction | Bottom Recess | Slide Type | Max Thickness |
|---|---|---|---|---|
| Blum Movento 760H (High Capacity)ACTIVE | 42.5 mm (1.673") | 13 mm | Undermount | 16 mm |
| Blum Tandem 563H / 563F (5/8" Material) | 49 mm (1.9375") | 13 mm | Undermount | 16 mm |
| Blum Tandem 563F (3/4" Material) | 42.5 mm (1.673") | 13 mm | Undermount | 19 mm |
| Salice Futura F70 / F7ONG | 42 mm (1.654") | 12.5 mm | Undermount | 16 mm |
| Standard Side-Mount Ball Bearing (1/2" Clearance) | 25.4 mm (1") | 0 mm | Side Mount | 19 mm |
| Accuride 3832 Classic Full Extension | 25.4 mm (1") | 0 mm | Side Mount | 19 mm |
Mathematical Derivation for Blum Movento 760H (High Capacity) Drawer Box
How internal opening dimensions convert into saw cut dimensions with zero binding.
Deducts the factory runner clearance specified by Blum to allow free gliding without binding.
Saw cut dimension for the front and rear cross-members between the two outer drawer sides.
Allows the concealed runner mechanism to tuck under the drawer box floor.
Engineering Specifications & Troubleshooting Guide: Blum Movento 760H (High Capacity)
Factory-tested parameters, common failure modes, and workbench best practices.
- Premium heavy-duty runner rated at 125 lbs (60kg) dynamic load capacity.
- 4-dimensional adjustment: height, side, tilt, and depth.
- Requires smooth synchronization rod for drawers wider than 24 inches.
Failing to account for the depth adjustment mechanism when measuring internal cabinet clear depth.
Frequently Asked Questions: Blum Movento 760H (High Capacity)
Manufacturer specifications, cabinet opening deductions, and workshop installation.
Q1What is the drawer box width deduction for Blum Movento 760H (High Capacity)?
Q2What bottom recess notch is needed for Blum Movento 760H (High Capacity)?
Q3What is the maximum drawer side thickness for Blum Movento 760H (High Capacity)?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: