Salice Futura F70 / F7ONG Drawer Box & Clearance Calculator
Pre-loads 42mm (1.654") width deduction and 12.5mm bottom recess to output exact saw cut-sheets for cabinet drawer boxes.
For a standard 24.00" (609.6mm) cabinet opening using Salice Futura F70 / F7ONG, build the outside drawer box width to exactly 22 3/8" (567.6mm). Front/Back sub-fronts cut at 21 1/8" with a 1/2" (12.5mm) bottom recess notch.
Cabinet Opening & Slide Hardware
Pre-loads exact manufacturer deduction (1.654") and bottom recess.
Exact clear opening measured between cabinet face-frame or sidewalls.
Selects a 21" nominal runner length while preserving cabinet rear clearance.
Opening 24" minus 1.654" hardware clearance
Saw cut between 2 sides
Clearance top & bottom
Workshop Saw Cut-List (Dadoed Bottom)
- 2x Drawer Sides:21" × 4 11/16"
- 2x Front / Back Sub:21 1/8" × 4 11/16"
- 1x Bottom Panel:21 5/8" × 20 1/4"
- Bottom Recess / Dado:1/2" recess; 6.35mm dado depth
Order Salice Futura F70 / F7ONG Runners
Genuine full-extension runners with integrated soft-close dampers and locking device clips.
Salice Futura F70 / F7ONG Clearance vs Competing Slides
Compare width deductions, bottom recesses, and max side thicknesses across slide runners.
| Material / Specification | Width Deduction | Bottom Recess | Slide Type | Max Thickness |
|---|---|---|---|---|
| Salice Futura F70 / F7ONGACTIVE | 42 mm (1.654") | 12.5 mm | Undermount | 16 mm |
| Blum Tandem 563H / 563F (5/8" Material) | 49 mm (1.9375") | 13 mm | Undermount | 16 mm |
| Blum Tandem 563F (3/4" Material) | 42.5 mm (1.673") | 13 mm | Undermount | 19 mm |
| Blum Movento 760H (High Capacity) | 42.5 mm (1.673") | 13 mm | Undermount | 16 mm |
| Standard Side-Mount Ball Bearing (1/2" Clearance) | 25.4 mm (1") | 0 mm | Side Mount | 19 mm |
| Accuride 3832 Classic Full Extension | 25.4 mm (1") | 0 mm | Side Mount | 19 mm |
Mathematical Derivation for Salice Futura F70 / F7ONG Drawer Box
How internal opening dimensions convert into saw cut dimensions with zero binding.
Deducts the factory runner clearance specified by Salice to allow free gliding without binding.
Saw cut dimension for the front and rear cross-members between the two outer drawer sides.
Allows the concealed runner mechanism to tuck under the drawer box floor.
Engineering Specifications & Troubleshooting Guide: Salice Futura F70 / F7ONG
Factory-tested parameters, common failure modes, and workbench best practices.
- Italian engineered 70 lb capacity concealed runner with integrated Smove soft-close dampers.
- Width deduction is 42mm (1-21/32").
- Side thickness accepts up to 16mm (5/8") Baltic birch plywood.
Not drilling the rear 6mm hook hole at the exact 11mm height from bottom inside edge.
Frequently Asked Questions: Salice Futura F70 / F7ONG
Manufacturer specifications, cabinet opening deductions, and workshop installation.
Q1What is the drawer box width deduction for Salice Futura F70 / F7ONG?
Q2What bottom recess notch is needed for Salice Futura F70 / F7ONG?
Q3What is the maximum drawer side thickness for Salice Futura F70 / F7ONG?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: