Grass Dynapro Soft-Close (5/8" Sides) Drawer Box & Clearance Calculator
Pre-loads 43mm (1.693") width deduction and 13mm bottom recess to output exact saw cut-sheets for cabinet drawer boxes.
For a standard 24.00" (609.6mm) cabinet opening using Grass Dynapro Soft-Close (5/8" Sides), build the outside drawer box width to exactly 22 5/16" (566.6mm). Front/Back sub-fronts cut at 21 1/16" with a 1/2" (13mm) bottom recess notch.
Cabinet Opening & Slide Hardware
Pre-loads exact manufacturer deduction (1.693") and bottom recess.
Exact clear opening measured between cabinet face-frame or sidewalls.
Selects a 21" nominal runner length while preserving cabinet rear clearance.
Opening 24" minus 1.693" hardware clearance
Saw cut between 2 sides
Clearance top & bottom
Workshop Saw Cut-List (Dadoed Bottom)
- 2x Drawer Sides:21" × 4 5/8"
- 2x Front / Back Sub:21 1/16" × 4 5/8"
- 1x Bottom Panel:21 9/16" × 20 1/4"
- Bottom Recess / Dado:1/2" recess; 6.35mm dado depth
Order Grass Dynapro Soft-Close (5/8" Sides) Runners
Genuine full-extension runners with integrated soft-close dampers and locking device clips.
Grass Dynapro Soft-Close (5/8" Sides) Clearance vs Competing Slides
Compare width deductions, bottom recesses, and max side thicknesses across slide runners.
| Material / Specification | Width Deduction | Bottom Recess | Slide Type | Max Thickness |
|---|---|---|---|---|
| Grass Dynapro Soft-Close (5/8" Sides)ACTIVE | 43 mm (1.693") | 13 mm | Undermount | 16 mm |
| Blum Tandem 563H / 563F (5/8" Material) | 49 mm (1.9375") | 13 mm | Undermount | 16 mm |
| Blum Tandem 563F (3/4" Material) | 42.5 mm (1.673") | 13 mm | Undermount | 19 mm |
| Blum Movento 760H (High Capacity) | 42.5 mm (1.673") | 13 mm | Undermount | 16 mm |
| Salice Futura F70 / F7ONG | 42 mm (1.654") | 12.5 mm | Undermount | 16 mm |
| Standard Side-Mount Ball Bearing (1/2" Clearance) | 25.4 mm (1") | 0 mm | Side Mount | 19 mm |
Mathematical Derivation for Grass Dynapro Soft-Close (5/8" Sides) Drawer Box
How internal opening dimensions convert into saw cut dimensions with zero binding.
Deducts the factory runner clearance specified by Grass to allow free gliding without binding.
Saw cut dimension for the front and rear cross-members between the two outer drawer sides.
Allows the concealed runner mechanism to tuck under the drawer box floor.
Engineering Specifications & Troubleshooting Guide: Grass Dynapro Soft-Close (5/8" Sides)
Factory-tested parameters, common failure modes, and workbench best practices.
- German synchronized rack-and-pinion runner with exceptionally low pull-open force.
- Width deduction is 43mm (1-11/16").
- Features tool-free 3D front adjustment clips.
Forgetting the rear slide socket brackets when installing into face-frame style cabinetry.
Frequently Asked Questions: Grass Dynapro Soft-Close (5/8" Sides)
Manufacturer specifications, cabinet opening deductions, and workshop installation.
Q1What is the drawer box width deduction for Grass Dynapro Soft-Close (5/8" Sides)?
Q2What bottom recess notch is needed for Grass Dynapro Soft-Close (5/8" Sides)?
Q3What is the maximum drawer side thickness for Grass Dynapro Soft-Close (5/8" Sides)?
Next Step In Your Project (Companion Fabrication Tools)
Pair your current build with companion engineering calculators: